Phone book (Names)
13
English
2. Scroll to Copy and press Select.
3. Select the copying direction,
From phone to SIM card or vice
versa, and press Select.
4. Scroll to One by one, or Copy all,
and press Select.
5. If you select One by one
• Select whether to keep or
erase the original name and
phone number and press
Select.
• Scroll to the name and/or
phone number to be copied.
Press Copy to start copying or
Back to cancel the operation.
If you select Copy all
• Select whether to keep or
erase the original names and
phone numbers and press
Select.
•Press OK to start copying or
Back to cancel the operation.
If the name already is in the target
phone book with a different phone
number, an ordinal number is added
to the end of the name.
■
Assign tone
You can set the phone to play the
desired ringing tone when you
receive a call from a particular
phone number.
1. In the standby mode, press
Names;
2. Scroll to Assign tone and press
Select;
3. Scroll to the desired phone
number or name, press Assign;
4. Select the desired ringing tone
and press OK.
■
Phone book settings
1. In standby mode, press Names.
2. Scroll with or to
Settings and press Select.
Then you can select the phone book
(Memory in use), set the type of
view for stored names and phone
numbers, and check phone book
status using the following options:
• Memory in use: Select whether
the names and phone numbers
are saved in Phone or SIM card.
Note that when you change the
SIM card, the SIM card memory is
automatically selected.
• Type of view: Select how the
names and phone numbers are
shown, either Name list, or
Name, number, or Large font.
• Memory status: Scroll to SIM
card: or Phone:, you can see how
many names (or phone numbers)
are already saved and how many
can still be saved in the SIM card
or phone.
" !!"#$%
To Next Page
Loading...
