Menu functions
28
• If your drawing process was
interrupted by an incoming call,
for example, or by pressing ,
you can resume by choosing
Continue from the picture
editor’s menu.
Drawing the picture
A "pen" is used together with the
cursor to draw the picture. The pen
controls whether you want to draw
(Pen down, ) or not (Pen up,
). Move the cursor in the Pen
down state to draw the picture.
Move the cursor in the Pen up state
to navigate the picture.
Press to switch to Pen down,
and press to switch to Pen up.
You may also press Options, and
choose Pen up or Pen down from the
list.
The Colour controls whether you
want the line to be Black (),
White (), or Dotted ().
You can quickly toggle among the
colours by pressing . You can
also press Options, select Colour,
and then make your choice.
The centre of the cursor shows the
actual colour of the pixel beneath.
Press to toggle the current
pixel colour between black and
white without changing the pen
state.
Cursor movement: Cursor
movement is achieved by using the
number keys.
Respectively, and
correspond to up and down;
and correspond to left and
right; while , , and
correspond to the four
diagonal directions.
Press the corresponding number key
once and the cursor moves one pixel.
To move the cursor continuously,
press and hold the corresponding
number key.
Drawing options
Press Options during the drawing
process, you can get the following
options in addition to the pen state
and colour choices items mentioned
previously:
Insert: You can choose to insert a
line, a rectangle, a circle, some text
and a clip art in your picture.
• Line: When you choose this
option, the cursor is replaced
by an insertion point. One end
of the line is fixed, and you
define the other end of the
line by moving the insertion
point using the number keys.
Press Insert or to insert
the line in the desired
position.
!!"#$%
To Next Page
Loading...
