Menu functions
35
English
If the settings are not available, you
may key them in manually. For
appropriate settings, contact your
network operator or service provider.
The WAP settings may be available
for example on the Web site of the
network operator or service provider.
Saving the settings received as
a text message
When you receive the connection
settings as a text message, Service
settings received is displayed.
• To save the received settings:
Press Options, scroll to Save, and
press Select.
• If you want to view the settings
before saving them: Press
Options, scroll to View, and press
Select. Press Save to save the
settings.
Keying in the connection
settings manually
For appropriate settings, contact
your network operator or service
provider.
1. In the Services menu, scroll to
Settings and press Select.
2. Press Select when Connection
settings is displayed.
3. Scroll to a set of connection
settings and press Options.
A set is a collection of settings
needed for making a connection
to a WAP service.
4. Scroll to Edit and press Select.
5. Scroll to each of the settings
below and press Select.
• Homepage: Key in the
homepage address of the WAP
service you want to use (press
for a dot), and press OK.
• Connection type: Scroll to
Continuous or Temporary,
and press Select.
• Connection security: Scroll to
On or Off, and press Select.
When the connection security
is on, the phone tries to use a
secure connection with the
WAP service. If a secure
connection is not available,
the connection will not be
made. If you wish to connect
using a non-secure
connection, set the
connection security to Off.
• Bearer: Press Select to choose
Data. For pricing, connection
speed and other information,
contact your network
operator or service provider.
• Dial-up number: Key in the
number and press OK.
• IP address: Key in the address
(press for a dot) and
press OK.
• Authentication type: Scroll to
Secure or Normal, and press
Select.
"$ !!"#$%
To Next Page
Loading...
