Nokia 3610 - Security; Access codes

To Next Page

To Previous Page

Settings

number and the message centre number must be included

in the fixed dialling list.

Closed user group — to specify a group of people whom

you can call and who can call you (network service)

Security level — to set the phone to ask for the security

code whenever a new SIM card is inserted into the phone,

select Phone. If you select Memory, the phone asks for the

security code when the SIM card memory is selected, and

you want to change the memory in use.

Access codes — to change the security code, PIN code,

PIN2 code, or restriction password

Authority certificates or User certificates — to view the

list of the authority or user certificates downloaded into

your phone. See "Certificates", p. 57.

Security module sett. — to view security module details,

select Module PIN request, or change the module PIN and

signing PIN. See also "Access codes", p. 12.

Restore factory settings

To reset some of the menu settings to their original values,

select Menu > Settings > Rest. factory sett. > Restore

settings only. Enter the security code. If you have not

created a security code, the phone will prompt you to

create one. The names and phone numbers saved in

Contacts, are not deleted.

Nokia_3610_APAC_UG_en.book Page 43 Monday, September 22, 2008 10:40 AM

Other manuals for Nokia 3610