Nokia 5500 - Enhanced Voice Dialing; Make a Conference Call

Copyright © 2007 Nokia. All rights reserved. 23
Call functions
Enhanced voice dialing
You can make a phone call by saying the name that is
saved in the contact list of the phone. A voice command is
added automatically to all entries in the contact list of the
phone.
Use long names, and avoid similar names for different
numbers.
Make a voice dialing call
If an application is sending or receiving data using a packet
data connection, end the application before you use voice
dialing.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you
should not rely solely upon voice dialing in all
circumstances.
1 In the standby mode, press and hold the right selection
key. A short tone is played, and Speak now is displayed.
If you are using a compatible headset with the headset
key, press and hold the headset key.
2 Say the voice command clearly. The phone plays the
voice command of the best match. After about 1.5
seconds, the phone dials the number; if the result is not
the correct one, before dialing select Next, and select
another entry to dial it.
Using voice commands to carry out a phone function is
similar to voice dialing. See “Voice commands”, p. 56.
Make a conference call
Conference call is a network service.
1 Make a call to the first participant.
2 To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3 To join the first participant in the conference call when
the new call is answered, select Options > Conference.
• To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
The phone supports conference calls between a
maximum of six participants, including yourself.
• To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant and Private. The conference call
is put on hold on your phone. The other participants
can still continue the conference call. To return to
the conference call, select Options > Add to
conference.
• To drop a participant, select Options > Conference
> Drop participant, scroll to the participant, and
select Drop.
4 To end the conference call, press the end key.