Copyright © 2007 Nokia. All rights reserved. 59
Tools
Operator logo — this setting is visible only if you have
received and saved an operator logo. You can select
whether the operator logo is shown.
Display
Select Menu > Tools > Settings > Phone > Display and
from the following options:
Brightness — to adjust the brightness of the display
Power saver time-out — to set the time-out for the power
saver to activate
Light time-out — to set the time-out for the phone
backlights
Call
Select Menu > Tools > Settings > Call and from the
following options:
Send my caller ID (network service) — to set your phone
number to be displayed (Yes) or hidden (No) from the
person whom you are calling. The value may be set by your
network operator or service provider when you subscribe to
the service (Set by network).
Call waiting (network service) — to set the network to
notify you of a new incoming call while you have a call in
progress. To request the network to activate call waiting,
select Activate. To request the network to deactivate call
waiting, select Cancel. To check whether the function is
active, select Check status.
Reject call with SMS — to enable rejecting phone calls
with a text message. See “Answer or reject a call”, p. 24.
Message text — to enter a text to be sent when you reject
a call with a text message
Automatic redial — to set the phone to make a maximum
of 10 attempts to connect the call after an unsuccessful
call attempt. Press the end key to stop automatic redialing.
Summary after call — to set the phone to briefly display
the approximate duration of the last call
Speed dialling > On — to set the phone to dial the
numbers assigned to the speed dialing keys 2 to 9 by
pressing and holding the corresponding number key
Anykey answer > On — to answer an incoming call by
briefly pressing any key, except the end key, left and right
selection keys, the power key, volume keys, and the push to
talk key
Line in use (network service) — this setting is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line (Line 1 or Line 2)
you want to use for making calls and sending short
messages.
Calls on both lines can be answered irrespective of the
selected line. You cannot make calls if you select Line 2
and have not subscribed to this network service. To prevent