Nokia 5500 - Settings

58 Copyright © 2007 Nokia. All rights reserved.
Tools
Important: In the offline profile you cannot make
or receive any calls, or use other features that
require cellular network coverage. Calls may still
be possible to the official emergency number
programmed into your device. To make calls, you
must first activate the phone function by
changing profiles. If the device has been locked,
enter the lock code.
Settings
Phone
General
Select Menu > Tools > Settings > Phone > General and
from the following options:
Phone language — to change the language for the display
texts in your phone. This change may also affect the format
used for date and time and the separators used, for
example, in calculations. If you select Automatic, the
phone selects the language according to the information
on your SIM card. After you have changed the display text
language, the phone restarts.
Writing language — to change the writing language of
your phone. Changing the language affects the characters
and special characters available when writing text and the
predictive text dictionary used.
Predictive text — to set predictive text input On or Off for
all editors in the phone. Select a language for entering
predictive text from the list.
Welcome note / logo — to set the welcome note or logo
which is displayed briefly each time you switch on the
phone.
Orig. phone settings — to reset some of the settings to
their original values. You need the lock code. See
“Security”, p. 63.
Standby mode
Select Menu > Tools > Settings > Phone > Standby mode
and from the following options:
Active standby — to enable or disable active standby. See
“Active standby”, p. 18.
Left selection key and Right selection key — to assign a
shortcut to the left and right selection keys in the standby
mode
Active standby apps. — to select the application shortcuts
you want to appear in the active standby. This setting is
available only if Active standby is set to On.
Navigation key right, Navigation key left, Navigat. key
down, Navigation key up, and Selection key — to assign
function shortcuts for scrolling in different directions or
pressing the scroll key in the standby mode. The scroll key
shortcuts are not available if Active standby is On.