88 Copyright © 2007 Nokia. All rights reserved.
Music
To return to the standby mode and leave the music player
in the background, press the end key.
To play the music tracks repeatedly, select Options > Loop.
Select All to repeat all the currently playing tracks, One to
repeat the currently playing track, or Off to not repeat
tracks.
Music player tapping commands
To pause playback or resume paused playback, tap twice on
the upper part of the keypad.
To skip tracks, tap twice on either the
left or right lower side of the phone
with your fingertips. For the tapping
commands to work, they must be
enabled in Tapping settings. See
“Tapping settings”, p. 70.
Audio settings
With Audio settings, you can adjust the tone of the sound
and apply effects to the sound. Select Options > Audio
settings.
Equalizer
With Equaliser, you can enhance or diminish frequencies
during music playback and modify how your music sounds.
Select Options > Audio settings > Equaliser. To use a
preset, scroll to it, and select Options > Activate.
Create a new preset
1. To create a new preset, select Options > New preset,
and enter the preset’s name.
2. To move between frequency bands, scroll left or right.
To enhance or diminish sound in the frequency band,
scroll up or down.
3. Select Back.
Visual Radio
You can use the Visual Radio application as a FM radio
with automatic tuning and preset stations, or with parallel
visual information related to the radio program if you tune
in to stations that offer Visual Radio service. The Visual
Radio service uses packet data (network service).
To use the Visual Radio service, the following requirements
must be met:
• The radio station and your network operator must
support this service.
• Your Internet access point must be defined for access
to the network operator’s Visual Radio server.
• The preset radio station must have the correct Visual
Radio service ID defined and have Visual Radio service
enabled.
To Next Page
Loading...
