26 Copyright © 2007 Nokia. All rights reserved.
Write text
Write text
You can enter text, for example, when writing messages,
using traditional or predictive text input. When you write
text, appears on the top right of the display,
indicating predictive text input, or appears,
indicating traditional text input. To set the predictive text
input on or off when writing text, press # twice within 1.5
seconds; or press the edit key and select Predictive text
on or Predictive text > Off.
, , or appears next to the text input
indicator, indicating the character case. To change the
character case, press #.
indicates the number mode. To change between
letter and number mode, press and hold #, or press the edit
key, and select Number mode or Alpha mode.
Traditional text input
Press a number key, 1 to 9, repeatedly until the desired
character appears. Not all characters available under a
number key are printed on the key. The availability of
characters depends on the selected writing language. See
Writing language in “Phone”, p. 58.
If the next letter you want is on the same key as the
present one, wait until the cursor appears (or scroll
forward to end the time-out period), and enter the letter.
To insert a number, press and hold the number key.
The most common punctuation marks and special
characters are available under the 1 key. For more
characters, press *; or press the edit key, and select Insert
symbol.
To erase a character, press the clear key. To erase more
characters, press and hold the clear key.
To insert a space, press 0. To move the cursor to the next
line, press 0 three times.
Predictive text input
You can enter any letter with a single keypress using
predictive text input. To activate predictive text input,
press the edit key, and select Predictive text on. This
activates predictive text input for all editors in the phone.
1 To write the desired word, press the keys 2—9. Press
each key only once for one letter. The word changes
after every keypress.
To Next Page
Loading...
