Nokia 5500 - Log in to Push to Talk; Exit Push to Talk; Make a One-To-One Call

Copyright © 2007 Nokia. All rights reserved. 81
Connectivity
Default nickname — Enter your nickname shown to other
users. Your service provider may have disabled the editing
of this option in your phone.
Show my PTT address — Select Never if you want to hide
your push to talk address from others in push to talk
channels and one-to-one calls.
Show my login status — Select Yes if you want your status
to be shown or No if you want your status to be hidden.
Connection settings
Domain — Enter the domain name obtained from your
service provider.
Access point name — Enter the push to talk access point
name. The access point name is needed to establish a
connection to the GSM/GPRS network.
Server address — Enter the IP address or domain name of
the push to talk server obtained from your service provider.
User name — Enter your user name obtained from your
service provider.
Password — Enter your password used to enter the
push to talk service.
Log in to push to talk
Select Menu > Connect. > PTT, or press the
push to talk key. Push to talk automatically logs in to the
service when started.
When log in is successful, push to talk automatically
connects to channels that were active when the
application was last closed. If the connection is lost, the
device automatically tries to log back in until you exit push
to talk.
indicates a push to talk connection.
indicates that push to talk is set to do not disturb
(DND).
Exit push to talk
Select Menu > Connect. > PTT > Options > Exit. Switch
push to talk off after exiting application? is displayed.
Select Yes to log out and close the service. If you want to
keep the application active in the background, select No.
Make a one-to-one call
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the
volume may be extremely loud.
1. Select Menu > Connect. > PTT > Options > PTT
contacts, scroll to the contact you want to talk to, and
press the push to talk key.
2. When the connection has been established, to talk to
the other participant, press and hold the push to talk
key the entire time you are talking.