Nokia 5500 - Speech; Setting Wizard; Tapping Settings

70 Copyright © 2007 Nokia. All rights reserved.
Tools
and infrared are available on both devices, it is preferable
to use Bluetooth.
Depending on the other phone, synchronization may not
be possible and data can be copied only once.
To transfer or synchronize data:
1 When using infrared, place the devices so that the
infrared ports face each other, and activate infrared on
both devices.
Select Menu > Tools > Transfer. If you have not used
Data transfer before, information about the
application is displayed. Select Continue to start
transferring data.
If you have used Transfer, select Transfer data.
2 Select whether to use Bluetooth or infrared for
transferring the data. When using Bluetooth, the
phones need to be paired in order to transfer data.
Depending on the type of the other phone, an
application may be sent and installed on the other
phone to enable the data transfer. Follow the
instructions.
3 Select what content you want to be transferred to your
phone.
4 Content is transferred to your phone. The transfer time
depends on the amount of data. You can stop the
transfer and continue later.
Speech
In Speech, you can select the voice and the language used
for reading messages and adjust the voice properties, such
as rate and volume. Select Menu > Tools > Speech.
To view details of a voice, scroll right, scroll to the voice,
and select Options > Voice details. To test a voice, scroll
to the voice, and select Options > Play voice.
Setting wizard
Sett. wizard configures your device for operator (MMS,
GPRS, and Internet) and e-mail settings based on your
network operator information. Configuring other settings
may also be possible.
To use these services, you may have to contact your
network operator or service provider to activate a data
connection or other services.
To edit settings, select Menu > Tools > Sett. wizard and
the item you want to configure.
Tapping settings
You can control some functions of your phone by tapping
on the phone. With Tapping settings you can define how
the tapping commands work.