Nokia 5500 - Call Barring; Network; Enhancement

66 Copyright © 2007 Nokia. All rights reserved.
Tools
Call barring
Call barring (network service) allows you to restrict the
calls that you make and receive with your phone. To
change the settings, you need the barring password from
your service provider.
1 Select Menu > Tools > Settings > Call barring.
2 Scroll to the desired barring option, and to request the
network to set call restriction on, select Options >
Activate. To set the selected call restriction off, select
Cancel. To check whether the calls are barred, select
Check status. To change the barring password, select
Edit barrings passw.. To cancel all active call barrings,
select Cancel all barrings.
Call barring and call diverting cannot be active at the same
time.
When calls are barred, calls still may be possible to certain
official emergency numbers.
Network
Select Menu > Tools > Settings > Network and from the
following options:
Operator selection — To set the phone to search for and
select automatically one of the available networks, select
Automatic. To select the desired network manually from a
list of networks, select Manual. If the connection to the
manually selected network is lost, the phone sounds an
error tone and asks you to select a network again. The
selected network must have a roaming agreement with
your home network, that is, the operator whose SIM card
is in your phone.
Cell info display (network service) — To set the phone to
indicate when it is used in a cellular network based on
Micro Cellular Network (MCN) technology and to activate
cell info reception, select On.
Enhancement
To change settings of an enhancement, select Menu >
Tools > Settings > Enhancement and an enhancement,
such as Headset. Select from the following options:
Default profile — to select the profile you want to activate
each time you connect the enhancement to your phone
Automatic answer — to set the phone to answer an
incoming call automatically after 5 seconds when this
enhancement is connected to your phone. If the Ringing
type is set to Beep once or Silent, automatic answer
cannot be used, and you must answer the phone manually.
Lights — To set the phone lights continuously on while
using the enhancement, select On.
To use the text phone, select Text phone > Use text phone
> Yes.