Nokia 5500 - Define a Push to Talk Access Point; Settings for Push to Talk

80 Copyright © 2007 Nokia. All rights reserved.
Connectivity
Besides the packet data counters, the phone registers only
one-to-one calls in the recent calls lists in Log. The
participants should confirm the reception of any
communications where appropriate as there is no other
confirmation of whether the recipients have heard the call.
To check availability and costs, and to subscribe to the
service, contact your network operator or service provider.
Note that roaming services may be more limited than
home network services.
While connected to the push to talk service, you can use
the other functions of the phone. Many of the services
available for traditional voice calls (for example, voice
mailbox) are not available for push to talk
communications.
Define a push to talk access point
Many service providers require you to use an Internet
access point for your default access point. Other service
providers allow you to use a WAP access point. Contact
your service provider for more information.
If you do not have a WAP connection, you may need to
contact your service provider for assistance with the
connection.
Settings for push to talk
For push to talk service settings, contact your network
operator or service provider. You may receive the settings
over the air in a configuration message.
To view and change push to talk settings, select Menu >
Connect. > PTT > Options > Settings.
User settings
Incoming PTT calls — To see a notification of incoming
calls, select Notify. To answer PTT calls automatically,
select Auto-accept. If you do not want to receive PTT calls,
select Not allowed.
PTT call alert tone — Select the tone for incoming
push to talk calls. If you want the incoming call alert
setting for push to talk to follow your profile settings,
select Set by profile. For example, if your profile is silent,
push to talk is set to do not disturb (DND) and, except for
callback requests, you are not available to others using
push to talk.
Callback request tone — Select a tone for callback
requests.
Application start-up — To start push to talk
automatically, select Always automatic. To start
push to talk automatically only while in your home
network, select Auto in home netw..