Get started
3
English
Plug and play service
When you switch on your phone for 
the first time, and the phone is in 
the standby mode, you are asked to 
get the configuration settings from 
your service provider (network 
service). Confirm or decline the 
query. See "Connect to service 
provider support ," p. 42, and 
"Configuration settings service" 
p.
xi
.
■ Normal operating 
position
Use the phone only in its normal 
operating position.
Your device has an external antenna.
Note: As with any other radio 
transmitting device, do not touch 
the antenna unnecessarily when the 
device is switched on. Contact with 
the antenna affects call quality and 
may cause the device to operate at a 
higher power level than otherwise 
needed. Avoiding contact with the 
antenna area when operating the 
device optimizes the antenna 
performance and the battery life.
■ Wrist strap
Remove the back cover and the 
battery. Insert the strap as shown in 
the picture. 
9247786_6103_2_en_hk.fm  Page 3  Friday, February 24, 2006  5:06 PM