Nokia 6103 - Infrared

Settings
40
that are currently paired with the
phone, select Paired devices.
Select Options to access available
options depending on the status of
the device and the Bluetooth
connection. Select Assign short
name, Auto-conn. without
confirmation, Delete pairing or Pair
new device.
Bluetooth settings
To define how your phone is shown
to other Bluetooth devices, select
Menu > Settings > Connectivity >
Bluetooth > Bluetooth settings >
My phone's visibility or My phone's
name.
If you are concerned about security,
turn off Bluetooth or set My phone's
visibility to Hidden. Always accept
only Bluetooth communication from
others with whom you agree.
Infrared
You can set up the phone to send
and receive data through its infrared
(IR) port. To use an IR connection,
the device with which you want to
establish a connection must be IrDA
compliant. You can send or receive
data to or from a compatible phone
or data device (for example, a
computer) through the IR port of
your phone.
Do not point the IR (infrared) beam
at anyone's eyes or allow it to
interfere with other IR devices.
Infrared devices are Class 1 laser
products.
When sending or receiving data,
ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions between
the devices.
To activate the IR port of your phone
to receive data using IR, select
Menu > Settings > Connectivity >
Infrared.
To deactivate the IR connection,
select Menu > Settings >
Connectivity > Infrared. When the
phone displays Deactivate infrared?,
select Yes.
If data transfer is not started within
2 minutes after the activation of the
IR port, the connection is cancelled
and must be started again.
IR connection indicator
When is shown continuously,
the IR connection is activated, and
your phone is ready to send or
receive data through its IR port.
When blinks, your phone is
trying to connect to the other
device, or a connection has been
lost.
9247786_6103_2_en_hk.fm Page 40 Friday, February 24, 2006 4:41 PM