Messages
14
for the text to be sent as two
messages.
Write and send a SMS
message
1. Select Menu > Messages >
Create message > Text message.
2. Enter a message. See "Write text"
p. 10. To insert text templates or
a picture into the message, see
"Templates" p. 15. Each picture
message comprises several text
messages. Sending one picture or
multipart message may cost
more than sending one text
message.
3. To send the message, select
Send > Recently used, To phone
number, To many, or To e-mail
address. To send a message using
a predefined message profile,
select Via sending profile. For the
message profile, see "Text and
SMS e-mail" p. 25. Select or
enter a phone number or e-mail
address, or select a profile.
Read and reply to a SMS
message
is shown when you receive an
SMS message or an SMS e-mail. The
blinking indicates that the
message memory is full. Before you
can receive new messages, delete
some of your old messages in the
Inbox folder.
1. To view a new message, select
Show. To view it later, select Exit.
To read the message later, select
Menu > Messages > Inbox. If
more than one message is
received, select the message that
you want to read. indicates
an unread message.
2. While reading a message, select
Options, and delete or forward
the message; edit the message as
a text message or an SMS e-mail,
rename the message you are
reading, or move it to another
folder; or view or extract
message details. You can also
copy text from the beginning of
the message to your phone
calendar as a reminder note. To
save the picture in the Templates
folder when reading a picture
message, select Save picture.
3. To reply as a message, select
Reply > Text message,
Multimedia msg., Flash message,
or Audio message. Enter the reply
message. When replying to an
e-mail, first confirm or edit the
e-mail address and subject.
4. To send the message to the
displayed number, select Send >
OK.
9247786_6103_2_en_hk.fm Page 14 Friday, February 24, 2006 4:41 PM
To Next Page
Loading...
