Nokia 7705 - Configuring RSVP-TE Message Pacing Parameters

MPLS Guide MPLS and RSVP-TE
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
141
node-id-in-rro exclude
interface "system"
no shutdown
exit
interface to-104
hello-interval 4000
no shutdown
exit
no shutdown
----------------------------------------------
A:ALU-1>config>router>rsvp#
3.20.9 Configuring RSVP-TE Message Pacing Parameters
RSVP-TE message pacing maintains a count of the messages that were dropped
because the output queue for the egress interface was full.
Use the following CLI syntax to configure RSVP-TE message pacing parameters:
CLI Syntax: config>router>rsvp
no shutdown
msg-pacing
period milli-seconds
max-burst number
The following example displays an RSVP-TE message pacing configuration output.
A:ALU-1>config>router>rsvp# info
----------------------------------------------
keep-multiplier 5
refresh-time 60
msg-pacing
period 400
max-burst 400
exit
interface "system"
no shutdown
exit
interface to-104
hello-interval 4000
no shutdown
exit
no shutdown
----------------------------------------------
A:ALU-1>config>router>rsvp#