Nokia 7705 - Show Commands (MPLS); Table 9 Router MPLS Admin-Group Field Descriptions

MPLS Guide MPLS and RSVP-TE
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
233
3.24.2.3 Show Commands (MPLS)
admin-group
Syntax admin-group group-name
Context show>router>mpls
Description This command displays MPLS administrative group information.
Parameters group-name — specifies the administrative group name
Output The following output is an example of MPLS administrative group information, and Table 9
describes the fields.
Output Example
A:ALU-1# show router mpls admin-group
=================================================
MPLS Administrative Groups
=================================================
Group Name Group Value
-------------------------------------------------
green 15
red 25
yellow 20
-------------------------------------------------
No. of Groups: 3
=================================================
A:ALU-1#
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.
Table 9 Router MPLS Admin-Group Field Descriptions
Label Description
Group Name The name of the administrative group. The name identifies the
administrative group within a router instance.
Group Value The unique group value associated with the administrative group.
If the value displays “-1”, then the group value for this entry has
not been set.
No. of Groups The total number of configured administrative groups within the
router instance