Nokia 7705 - 5.10.4 Configuring Interface Parameters

MPLS Guide Label Distribution Protocol
3HE 18686 AAAB TQZZA © 2022 Nokia.
Use subject to Terms available at: www.nokia.com
435
The following example displays the import and export policy configuration output.
ALU-1>config>router>ldp# info
----------------------------------------------
export "LDP-export"
import "LDP-import"
interface-parameters
exit
targeted-session
exit
----------------------------------------------
5.10.4 Configuring Interface Parameters
Use the following CLI syntax to configure LDP interface parameters:
CLI Syntax: config>router# ldp
interface-parameters
hello timeout factor
interface ip-int-name
hello timeout factor
keepalive timeout factor
local-lsr-id {system | interface}
transport-address {system | interface}
no shutdown
keepalive timeout factor
transport-address {system|interface}
Example: config>router# ldp
config>router>ldp# interface-parameters
config>router>ldp>if-params# interface to-104
config>router>ldp>if-params>if# hello 15 3
config>router>ldp>if-params>if# local-lsr-id system
config>router>ldp>if-params>if# no shutdown
config>router>ldp>if-params>if# exit
config>router>ldp>if-params# exit
config>router>ldp#
The following example displays the LDP interface parameter configuration output.
ALU-1>config>router>ldp# info
----------------------------------------------
import "LDP-import"
interface-parameters
hello 15 3
keepalive 30 3
interface "to-104"
hello 15 3
keepalive 30 3