PAY-AS-YOU-GROW FP4 HARDWARE LICENSING
REFERENCE GUIDE
First Steps for New Users
Issue: 02 3HE 15453 AAAA TQZZA 01 33
Step 7. After the license has been activated on the router, the individual upgrades
must be assigned to the IOM or the XMAs as shown in Figure 12 and
Figure 13.
Figure 12 Assigning Upgrades to Card/MDA
Figure 13 Show MDA Detail
sw0882
*A:bkvm18>config>card>mda# show mda
MDA 1/1 detail
Slot Mda Provisioned Type Admin Operational
Equipped Type (if different) State State
1 1 s36-100gb-qsfp28:cr1600g up up
*A:bkvm20>config>card>mda# upgrade <?>
- upgrade <index> path <upgrade-name>
<index> : [1..6]
<upgrade-name> : [32 chars max]
*A:bkvm18>config>card>mda# upgrade 1 path <tab>
path <upgrade-name>
“cr1600g-cr2400g” “cr1600g-er1600g”
*A:bkvm20>config>card>mda# upgrade 1 path “cr1600g-cr2400g”
*A:bkvm20>config>card>mda# upgrade 2 path “cr2400g-er2400g”
CLI presents options available based on the mda-type and current level
sw0883
*A:bkvm18>config>card>mda# show mda 1/1 detail
MDA 1/1 detail
Slot Mda Provisioned Type Admin Operational
Equipped Type (if different) State State
1 1 s36-100gb-qsfp28:cr1600g up provisioned
(not equipped)
MDA Licensing Data
Licensed Level : er2400g
Description : 2.4T, 24p, Edge Routing
Upgrade 1 : cr1600g-cr2400g
Upgrade 2 : cr2400g-er2400g
This reflects the highest level based on provisioned
level and upgrades
To Next Page
Loading...
