Get started
13
3. Activate the Bluetooth feature on your device. See the user guide of
your device for instructions.
4. Set your device to search for Bluetooth devices, and select the car kit
from the list of found devices.
5. On your device, enter the Bluetooth passcode shown on the car kit
display to pair and connect the car kit to your device.
In some devices you may need to make the connection separately
after pairing. See the user guide of your device for details.
You only need to pair the car kit with your device once.
If the pairing is successful, the car kit appears in the menu of your
mobile device where you can view the currently paired Bluetooth
devices. If the pairing fails, try to pair again by carefully following the
pairing instructions. You can pair the car kit with up to eight devices but
connect it to only one device at a time.
Connect the car kit manually
When the car kit is switched on and you have not connected it to a
mobile device, you can make the connection as follows:
Press the Navi wheel in the standby mode, and select Bluetooth > Paired
devices. Select the desired device and Connect.
Connect the car kit automatically
You can set your device to allow an automatic connection with the car
kit when the car kit is switched on. To do this in Nokia devices, change
your paired device settings in the Bluetooth menu.
When you switch on the car kit, the car kit tries to make a Bluetooth
connection to the last used device. If this fails, the car kit tries to
connect to one of the other Bluetooth devices that have been most
recently paired with it.
Disconnect the car kit
To disconnect the car kit from your device, close the Bluetooth
connection with the car kit in the Bluetooth menu of your device, or
9200326_en1.fm Page 13 Thursday, January 25, 2007 11:09 AM
To Next Page
Loading...
