Call functions
15
3. Call functions
■ Adjust the loudspeaker volume
To adjust the volume during a call or when a call is alerting, turn the
Navi wheel to left to decrease the volume or to right to increase it.
When you change the volume, the horizontal bar at the top of the
display moves accordingly. To save the volume, press the Navi wheel
when Save volume is displayed.
To set the volume to silent, press in the standby mode or when you
receive a call. To restore the original volume, press .
■ Make a call
To enter a phone number, turn the Navi wheel to left in the standby
mode. Scroll to the first digit of the phone number, and press the Navi
wheel. Select the other digits of the phone number in the same way. (To
delete the most recent digit, press .) Once the phone number is
displayed, press to call it. To end the call (or cancel the call attempt),
press .
To search for a contact from Contacts, see “Search for a contact,” p. 18.
To open the list of last dialed numbers, press . To call the last dialed
number, press twice.
To activate the voice dialing feature of your mobile device, press
when you are not in a call, if your device supports the use of this feature
with the car kit. Proceed as instructed in the user guide of your device.
For voice dialing, you must save voice tags for the desired contacts in
your device.
■ Speed dialing
You can assign a contact to one of the speed dialing numbers 1 to 9. See
“Speed dials,” p. 18.
To use speed dialing, turn the Navi wheel to left in the standby mode,
and scroll to the desired speed dialing number. The contact assigned to
9200326_en1.fm Page 15 Thursday, January 25, 2007 11:09 AM
To Next Page
Loading...
