Menu functions
20
To view the device that is currently connected to the car kit, select
Active device. To close the connection, press the Navi wheel.
To view the devices that are currently paired with the car kit, select
Paired devices. To connect the car kit with a paired device, select the
device and Connect. To remove the pairing, select the device and Delete
pairing.
To pair the car kit with a new device, select Pair with phone, and start
the pairing from your device. A Bluetooth passcode is shown on the car
kit display. Enter the same passcode on your device. See also “Pair and
connect the car kit,” p. 12.
■ Display settings
To adjust the display settings, press the Navi wheel in the standby mode,
and select Display settings.
To change the color of the display, such as the background and the
signal strength bar, select Colour themes and the desired color theme.
To adjust the brightness of the display, select Brightness and the desired
brightness level.
To set the time after which the display backlight turns off in the standby
mode, select Auto dimming and the desired time. If you select Off, the
backlight remains always on when the car kit is switched on.
■ Other settings
To adjust other settings of the car kit, press the Navi wheel in the
standby mode, and select Settings.
To set automatic answer on or off, select Automatic answer and the
desired option. If you select On, the car kit automatically answers an
incoming call. For the time after which the call is answered, see the user
guide of your mobile device.
To change the car kit language, select Language setting and the desired
language.
To define when the car radio is muted, select Phone sounds and the
desired option. If you select Calls only, the car radio is muted only when
9200326_en1.fm Page 20 Thursday, January 25, 2007 11:09 AM
To Next Page
Loading...
