Press the scroll key to choose the highlighted
Pinyin. Thus the selected Pinyin can be displayed in
the Pinyin window, and the other Pinyin will
disappear, and the candidate list corresponding to
this Pinyin can be activated (numbering will be
shown on each candidate, and the first candidate is
highlighted).
3. View candidate list to find out desired Chinese
character: when the candidate Chinese characters
exceed one line display, there will be up and down
arrows showing at the right end of the candidate
list. If you could not find a desired character in the
current list, you could scroll up or down to view the
previous line or the next line.
4. Input Chinese character: You can press the scroll key
or number key to input a candidate.
• Press scroll key to input: Scroll to left or right to
highlight the desired candidate, and then press
to input this Chinese character.
• Press number key to input: Directly press the
number key matching to the numbering of the
candidate character.
While your input candidate is inserted in the text
input window, the Chinese input window will be
closed and the predictive list will be shown at the
same time.
5. Input predictive character: If the current line of
predictive character list does not show your desired
character, you could scroll down to view the next
line of predictive character list. Find your desired
character, if it locates in the first highlighted
position in the list, you could directly press the scroll
key to input it; otherwise, you could first scroll right
to activate the predictive character list (the
characters in the list will have numbering,
meanwhile, the second character in the list will be
highlighted), then you could either press the
number key matching to the predictive character
numbering to input it, or scroll in the relevant
direction to find and highlight your desired
predictive character and then press the scroll key to
input it.
When you do not need the predictive list or you
could not find your desired Chinese character in the
predictive list, while the predictive list is not
activated, you could directly input the Pinyin for
next Chinese character. While the predictive list is
already activated, you have to press the right
selection key to close the predictive list first and
then continue to input the Pinyin for the next
Chinese character.
Pinyin input example: To input
characters for "Pinyin"
1. Enter into the text editing window for writing a text
message or any other possible position for
inputting Chinese character, and switch to Pinyin
input mode.
2. Input the Pinyin letter pin for "pin": press 7, 4, 6 in
sequence, and finally input * once for the 1st tone.
3. Scroll right to highlight pin- and then press the
scroll key to activate the candidate list.
4. The character for "pin" will be shown in the
candidate list. If this character locates in the first
highlighted position of the candidate list, you could
directly press the scroll key to input it, otherwise,
25
Cyan
Magenta
Yellow
Black
Cyan
Magenta
Yellow
Black
To Next Page
Loading...
Need help?
General
