To use the device as a packet data modem for your computer, select Access point, and
enter the access point name provided by your service provider.
To use a high-speed data connection, select High speed packet access > Enabled.
WLAN settings
Select Menu > Ctrl. panel > Settings and Connection > Wireless LAN.
To have an indicator displayed when there is a wireless LAN (WLAN) available in your
current location, select Show WLAN availability > Yes.
To select the interval for your device to scan for available WLANs, and to update the
indicator, select Scan for networks. This setting is not available unless you select Show
WLAN availability > Yes.
To set the device to test the internet capability of the selected WLAN automatically, to
ask for permission every time, or to never perform the connectivity test, select Internet
connectivity test > Run automatically, Ask every time, or Never run. If you select
Run automatically or allow the test to be performed when the device asks for it, and
the connectivity test is performed successfully, the access point is saved to internet
destinations.
To check the unique media access control (MAC) address that identifies your device,
enter *#62209526# in the home screen. The MAC address is displayed.
Advanced WLAN settings
Select Options > Advanced settings. The advanced WLAN settings are normally
defined automatically, and changing them is not recommended.
To edit the settings manually, select Automatic configuration > Disabled, and define
the following:
Long retry limit — Enter the maximum number of transmission attempts if the device
does not receive a receiving acknowledgement signal from the network.
Short retry limit — Enter the maximum number of transmission attempts if the device
does not receive a clear-to-send signal from the network.
RTS threshold — Select the data packet size at which the WLAN access point device
issues a request to send before sending the packet.
TX power level — Select the power level of your device when sending data.
Radio measurements — Enable or disable the radio measurements.
172 Settings
To Next Page
Loading...
