Nokia E52 - Page 173

Power saving — Select whether to use the WLAN power saving mechanism to save the
power in the device battery. Using the power saving mechanism enhances the battery
performance but may weaken WLAN interoperability.
To restore all settings to their original values, select Options > Restore defaults.
WLAN security settings
Select Menu > Ctrl. panel > Settings and Connection > Destinations > Access
point, and follow the instructions on the display.
To edit a wireless LAN (WLAN) access point, open one of the access point groups, and
select an access point marked with
.
To enter the settings for the selected security mode, select WLAN security settings.
WEP security settings
Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method encrypts data before it is
transmitted. Access to the network is denied to users who do not have the required WEP
keys. When the WEP security mode is in use, and your device receives a data packet not
encrypted with the WEP keys, the data is discarded.
In an ad-hoc network, all devices must use the same WEP key.
Select WLAN security settings and from the following:
WEP key in use — Select the desired WEP key.
Authentication type — Select Open or Shared.
WEP key settings — Edit the settings for the WEP key.
WEP key settings
In an ad-hoc network, all devices must use the same WEP key.
Select WLAN security settings > WEP key settings and from the following:
WEP encryption — Select the desired WEP encryption key length.
WEP key format — Select whether you want to enter the WEP key data in ASCII or
Hexadecimal format.
WEP key — Enter the WEP key data.
Settings 173