EasyManua.ls Logo

Nokia E52 - Page 174

Nokia E52
201 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
802.1x security settings
Select 802.1x as the WLAN security mode.
802.1x authenticates and authorises devices to access a wireless network, and prevents
access if the authorisation process fails.
Select WLAN security settings and from the following:
WPA/WPA2 — Select EAP (Extensible Authentication Protocol) or Pre-shared key (a
secret key used for device identification).
EAP plug-in settings — If you selected WPA/WPA2 > EAP, select which EAP plug-ins
defined in your device to use with the access point.
Pre-shared key — If you selected WPA/WPA2 > Pre-shared key, enter the shared
private key that identifies your device to the WLAN to which you connect.
WPA security settings
Select WPA/WPA2 as the WLAN security mode.
Select WLAN security settings and from the following:
WPA/WPA2 — Select EAP (Extensible Authentication Protocol) or Pre-shared key (a
secret key used for device identification).
EAP plug-in settings — If you select WPA/WPA2 > EAP, select which EAP plug-ins
defined in your device to use with the access point.
Pre-shared key — If you select WPA/WPA2 > Pre-shared key, enter the shared
private key that identifies your device to the WLAN to which you connect.
WPA2 only mode — To allow both TKIP and AES (Advanced Encryption Standard)
encryption, select Off. To allow AES only, select On
Wireless LAN plugins
Select Menu > Ctrl. panel > Settings and Connection > Destinations, and an access
point group.
The extensible authentication protocol (EAP) plug-ins are used in wireless networks to
authenticate wireless devices and authentication servers, and the different EAP plug-
ins make possible the use of various EAP methods (network service).
You can view the EAP plug-ins currently installed in your device (network service).
EAP plug-ins
1 To define the EAP plug-in settings, select Options > New access point and define
an access point that uses WLAN as a data bearer.
2 Select 802.1x or WPA/WPA2 as the security mode.
3 Select WLAN security settings > WPA/WPA2 > EAP > EAP plug-in settings.
174 Settings

Table of Contents

Other manuals for Nokia E52

Related product manuals