Nokia E62 - Insert and Remove a Memory Card

FCC DRAFT
4. To insert the battery, align the contacts of the battery
with the corresponding connectors on the battery
compartment, insert in the direction of the arrow, and
gently click the battery into place.
5. Insert the locking catches of the back cover into the
corresponding slots (1). Press down on the bottom
corners of the cover, and slide the cover in the
direction of the arrow (2).
Insert and remove a memory
card
If you have a memory card, follow the instructions to
insert it.
See "Memory," p. 22.
1. If necessary, remove the battery cover.
2. Slide the memory card into the memory card slot.
Ensure that the beveled corner of the memory card is
pointing towards the top of the device and the contact
area is facing down.
10
Get started
file:///C:/USERS/MODEServer/mehowell/14385651/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 10 Jan 16, 2006 10:36:24 PMfile:///C:/USERS/MODEServer/mehowell/14385651/rm-88_texas/en/issue_1/rm-88_texas_en_1.xml Page 10 Jan 16, 2006 10:36:24 PM