User Guide Configuring your network with the WebUI
3TG-02292-AAAA-TCZZA-02 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
29
Configuring your network with the WebUI
You can manage the FastMile 5G Gateway 3.2 and any connected devices using the
WebUI on a PC or laptop.
This section describes:
• how to establish a connection between the device on which you will access the
WebUI and the FastMile 5G Gateway 3.2
• how to log into the WebUI when needed to view and configure network
parameters
Accessing the WebUI
1. Ensure the Local Area Connection setting on your PC or laptop is configured as
"obtain an IP address automatically".
2. Do one of the following:
a. Establish a Wi-Fi connection
b. Connect your PC or laptop through the RJ45 Gigabit Ethernet LAN ports on
the backside of FastMile 5G Gateway 3.2
3. On your device, open a web browser, and enter the IP that is available on the
label at the bottom of the gateway, for example:
http://192.168.1.1
(default) or https: //192.168.1.1 (if pre-configured)
The Overview screen appears with the Nokia WebUI menu on the left of the
screen.
Note: The WebUI screens are designed for 1920 * 1080p resolution. The WebUI supported
browsers include Chrome, Edge, Mozilla Firefox and Safari.
Note: The FastMile 5G Gateway 3.2 must be powered up, see Using the power button.
To Next Page
Loading...
