User Guide WebUI hierarchy screens
3TG-02292-AAAA-TCZZA-02 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
69
• General
• Device Management
• LED Management
General
From the WebUI left-side menu, selecting System and then General will show you
these options:
• enter PIN to unlock your SIM card
• enter PUK and PIN to unblock your SIM card
• reboot device: the device restarts and keeps existing configuration
• factory reset: the device restarts and erases existing configuration
• change password
Unlocking or unblocking your SIM card
A SIM PIN number is defined by default and provided in a SIM plastic envelope.
If your PIN is locked, from the System General screen, click Enter PIN to unlock your
SIM card.
Note: For a PIN-locked SIM card after reboot, or factory reset, a PIN number will be needed.
Also, if a second SIM card B is used with PIN enabled and inserted to the CPE and its PIN
is verified, the SIM card A PIN number will be needed when it is inserted.
For uSIM cards, when status shows Available it means PIN number verification is needed.
When status shows Blocked it means the SIM PIN is blocked and you need to input a PUK
number and a new PIN number. When status shows Error it means the SIM card is disabled
because of a PUK error, or a modem failure, or a broken SIM card, or a specific PIN lock
acceptance feature is not active but the SIM card PIN number is locked.
To Next Page
Loading...
