EasyManua.ls Logo

Nokia FastMile 3.2 - Using the Signal Test Button

Nokia FastMile 3.2
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
82
User Guide
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3TG-02292-AAAA-TCZZA-02
See Understanding the LED colors for a description of the signal strength LED. The
number of lit LEDs indicate the signal strength. For example, three means a very
strong signal.
Using the signal test button
You can check and test the signal strength at any time by pressing the signal test
button on the side of the FastMile 5G Gateway 3.2 to check the LEDs and perform
corrective actions.
Figure 60 Location of signal test button
Note: Once you have a good 4G/LTE or 5G connection, it is recommended that you do not
relocate or rotate your device. It is strongly recommended that you position your device near
a window, where the best 4G/LTE or 5G signal is expected.
However, the omni-directional antenna is less susceptible to Internet speed changes when
rotating the device since it does not have a directional antenna.
Rotating your device may still influence the Internet speeds due to indoor signal reception
conditions.

Table of Contents

Related product manuals