User Guide WebUI hierarchy screens
3TG-02292-AAAA-TCZZA-02 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
57
Figure 40 Network: Static Routes
After configuring the applicable parameters:
• destination IPv4
• destination netmask
• gateway IPv4
•interface
You can add a static route by clicking Add+.
You can delete a static route by selecting it from the list and clicking Delete.
LAN settings
From the network menu, select LAN Settings.
The LAN and LAN IPv6 menu options appear in the FastMile 5G Gateway 3.2 WebUI
menu.
Note: If there is no pre-configuration for non-POTS LAN connection towards the destination
IP address (VoIP server and so on) via the VoIP APN, you can also do such settings using
the WebUI or ACS. Then a static route for the IP address via VoIP APN should be added in
the CPE.
To Next Page
Loading...
