When the wireless device is in the remote SIM mode,
you can only use a compatible connected
enhancement, such as a car kit, to make or receive
calls. Your wireless device will not make any calls while
in this mode, except to the emergency numbers
programmed into your device. To make calls from your
device, you must leave the remote SIM mode. If the
device is locked, enter the lock code to unlock it.
To leave the remote SIM mode, press the power key,
and select Exit remote SIM mode.
USB
Press , and select Tools > Connectivity > USB.
To have the device ask the purpose of the connection
each time a compatible data cable is connected, select
Ask on connection > Yes.
If Ask on connection is set to off or you want to
change the mode during an active connection, select
USB connection mode and from the following:
● PC Suite — Use Nokia PC applications such as Nokia
Nseries PC suite, and Nokia Software Updater.
● Mass storage — Transfer data between your
device and a compatible PC. Use this mode also for
downloading maps with the Nokia Map Loader PC
application.
● Image transfer — Print images on a compatible
printer.
● Media transfer — Synchronise music with
Windows Media Player.
PC connections
You can use your device with a variety of compatible
PC connectivity and data communications
applications. With Nokia Nseries PC Suite you can, for
example, transfer images between your device and a
compatible PC.
For information on Apple Macintosh support and
connecting your device to an Apple Macintosh device,
visit www.nseries.com/mac.
© 2008 Nokia. All rights reserved. 115
To Next Page
Loading...
