numbers or addresses, you can easily call or send a
message to the contact to a certain number or address.
The default number is also used in voice dialling.
1. In the contacts list, select a contact.
2. Select Options > Defaults.
3. Select a default to which you want to add a number
or an address, and select Assign.
4. Select a number or an address you want to set as a
default.
The default number or address is underlined in the
contact card.
Add ringing tones for contacts
Press , and select Contacts.
To define a ringing tone for a contact or a contact
group, do the following:
1. Press the scroll key to open a contact card or go to
the groups list, and select a contact group.
2. Select Options > Ringing tone. A list of ringing
tones opens.
3. Select the ringing tone you want to use for the
individual contact or the members of the selected
group.
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number i s sent with the call and yo ur devic e recognises
it).
To remove the ringing tone, select Default tone from
the list of ringing tones.
Copy contacts
When you open Contacts for the first time, the device
asks if you want to copy names and numbers from the
SIM card to your device.
To start copying, select OK.
If you do not want to copy the SIM contacts to your
device, select Cancel. The device asks if you want to
view the SIM contacts in the contacts directory. To view
the contacts, select OK. Contacts opens, and you can
see names stored on your SIM card marked with
.
SIM services
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider or other vendor.
© 2008 Nokia. All rights reserved.142
To Next Page
Loading...
Need help?
General
Weight and Dimensions
