Retrieve position information
Press , and select Tools > Connectivity > GPS
data > Position.
In the position view, you can view the position
information of your current location. An estimate of
the accuracy of the location is displayed.
To save your current location as a landmark, select
Options > Save position. Landmarks are saved
locations with more information, and they can be used
in other compatible applications and transferred
between compatible devices.
Trip meter
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
Press , and select Tools > Connectivity > GPS
data > Trip distance.
Select Options > Start to activate trip distance
calculation, and Stop to deactivate it. The calculated
values remain on the display. Use this feature outdoors
to receive a better GPS signal.
Select Reset to set the trip distance and time and
average and maximum speeds to zero, and to start a
new calculation. Select Restart to set the odometer
and total time to zero.
Maps
About Maps
Press , and select Maps.
With Maps, you can see your current location on the
map, browse maps for different cities and countries,
search for addresses and different points of interest,
plan routes from one location to another, view traffic
details, and save locations as favourites and send them
to compatible devices.
You can also purchase extra services, such as guides, a
turn-by-turn Drive & Walk navigation service with
voice guidance, and a traffic information service.
© 2008 Nokia. All rights reserved. 91
To Next Page
Loading...
