To send an image or a video clip in a multimedia
message to the other participant of the call, select
Options > Send MMS (in UMTS networks only). You
can edit the message and change the recipient before
sending. Press the call key to send the file to a
compatible device (network service).
To put an active voice call on hold while answering
another incoming call, select Options > Hold. To
switch between the active and the held call, select
Options > Swap.
To send DTMF tone strings (for example, a password),
select Options > Send DTMF. Enter the DTMF string
or search for it in Contacts. To enter a wait character
(w) or a pause character (p), press * repeatedly. To
send the tone, select OK. You can add DTMF tones to
the phone number or DTMF fields in a contact card.
Tip: When you have only one active voice call, to
put the call on hold, press the call key. To activate
the call, press the call key again.
During an active call, to route the sound from the
handset to the loudspeaker, select Options >
Activate loudspeaker. If you have attached a
compatible headset with Bluetooth connectivity, to
route the sound to the headset, select Options >
Activate handsfree. To switch back to the handset,
select Options > Activate handset.
To end an active call and replace it by answering the
waiting call, select Options > Replace.
If you have several calls active, to end them all, select
Options > End all calls.
Many of the options that you can use during a voice
call are network services.
Voice and video mailboxes
To call your voice or video mailbox (network services,
video mailbox available only in the UMTS network),
press and hold 1 in the standby mode, and select Voice
mailbox or Video mailbox.
To change the phone number of your voice or video
mailbox, press
, and select Tools > Utilities >
Call mailbox, a mailbox, and Options > Change
number. Enter the number (obtained from your
network service provider), and select OK.
Answer or decline a call
To answer the call, press the call key, or open the slide.
To mute the ringing tone of an incoming call, select
Silence.
© 2008 Nokia. All rights reserved.132
To Next Page
Loading...
