1. Press , and select Tools > Settings >
Connection > Wireless LAN.
2. To increase the background scan time interval,
adjust the time in Scan for networks. To stop
background scans, select Show WLAN
availability > Never.
3. To save your changes, press Back.
When Show WLAN availability is set to Never, the
WLAN availability icon is not shown in the standby
mode. However, you can still manually scan for
available WLAN networks, and connect to WLAN
networks as usual.
Q: How can I save my data before deleting it?
A: To save data, use Nokia Nseries PC Suite to
synchronise with or to make a back-up copy of all data
to a compatible computer. You can also send data
using Bluetooth connectivity to a compatible device.
You can also store data on a compatible memory card.
Q: What do I do if the memory is full?
A: Delete items from the device memory or mass
memory. If your device displays the note Not enough
memory to perform operation. Delete some data
first. or Memory low. Delete some data from phone
memory. when you are deleting several items at the
same time, delete items one by one, beginning with
the smallest items.
See "Free memory", p. 23.
Q: Why can’t I select a contact for my message?
A: The contact card does not have a phone number, an
address, or an e-mail address. Press
, select
Contacts, the relevant contact, and edit the contact
card.
Q: How can I end the data connection when the
device starts a data connection again and
again?
A: The device may be trying to retrieve a multimedia
message from the multimedia message centre. To stop
the device from making a data connection, press
,
and select Messaging > Options > Settings >
Multimedia message > Multimedia retrieval and
Manual to have the multimedia messaging centre
save messages to be retrieved later, or Off to ignore
all incoming multimedia messages. If you select
Manual, you receive a notification when you have a
new message in the multimedia message centre. If you
select Off, the device does not make any network
connections related to multimedia messaging. To set
the device to use a packet data connection only if you
start an application or action that needs it, press
,
and select Tools > Settings > Connection >
Packet data > Packet data connection > When
needed. If this does not help, switch the device off,
and switch it on again.
© 2008 Nokia. All rights reserved. 169
To Next Page
Loading...
