5.8 Information
BU 0500 GB Subject to technical alterations 117
Parameter Set value / Description / Note Device Supervisor
Parameter
set
P723 Actual voltage components Ud
0 ... 500 V Displays the actual field voltage component.
P724 Actual voltage components Uq
0 ... 500 V Displays the actual torque voltage component.
P725
Actual cosϕ?
0.00 ... 1.00
Displays the actual calculated cos ϕ of the drive.
P726 Apparent power
0.00 ... 99.99 kVA Displays the actual calculated apparent power. Basis for calculation are the motor data
P201...P209 ... .
P727 Mechanic power
-99.99 ... 99.99 kW Displays the actual calculated effective power of the motor. Basis for calculation are the motor
data P201...P209 ... .
P728 Mains voltage
0 ... 1,000 V Displays the actual mains voltage at the FI input.
P729 Torque
0 ... 400 % Displays the actual calculated torque. Basis for calculation are the motor data P201...P209 ... .
P730 Field
0 ... 400 % Displays the actual field in the motor as calculated by the inverter. Basis for calculation are the
motor data P201...P209 ... .
P731 Current parameter set
Shows the actual operating parameter set. 0 ... 3
0 = Parameter set 1
1 = Parameter set 2
2 = Parameter set 3
3 = Parameter set 4
P732 U phase current
S
0.0 ... 999.9 A Displays the actual U phase current.
NOTE: This value can deviate somewhat from the value in P719, due to the measurement
procedure used, even with symmetrical output currents.
P733 V phase current
S
0.0 ... 999.9 A Displays the actual V phase current.
NOTE: This value can deviate somewhat from the value in P719, due to the measurement
procedure used, even with symmetrical output currents.
To Next Page
Loading...
