nord NORDAC SK 5xxE Series - Page 119

5.8 Information
BU 0500 GB Subject to technical alterations 119
Parameter Set value / Description / Note Device Supervisor
Parameter
set
P741 ... - 01
...
... - 13
Bus Out process data
S
... - 01 = Status Word
Status word, source from P509.
... - 02 = Actual value 1 (P543)
... - 03 = Actual value 2 (P544)
... - 04 = Actual value 3 (P545)
... - 05 = Bus I/O Out Bit (P481)
The displayed value depicts
all Bus Out Bit sources linked
with OR.
... - 06 = Parameter data Out 1
... - 07 = Parameter data Out 2
... - 08 = Parameter data Out 3
... - 09 = Parameter data Out 4
... - 10 = Parameter data Out 5
Data during parameter
transfer.
0000 ... FFFF (hex) This parameter informs
about the actual status
word and the actual
values that are
transferred via the bus
systems.
... - 11 = Actual value 1 leading function
... - 12 = Actual value 2 leading function
... - 13 = Actual value 3 leading function
Actual value of leading
function P502/P503.
P742 Database version
S
0 ... 9999 Displays the internal database version of the FI.
P743 Inverter type
0.25 ... 11.00
Displays the inverter output in kW, e.g. "1.50" ⇒ FI with 1.5kW Nominal power.
P744 Configuration level
This parameter displays the special devices integrated in the FI. Display is in hexadecimal code
(SimpleBox, ControlBox, Bus system).
The display is in plain text when the ParameterBox is used.
0000 ... FFFF (hex)
SK 500E/510E = 0000 SK 520E = 0101 SK 530E = 0201
P745 Module version
0.0 ... 999.9 Design status (software version) of the technology unit (SK TU3-xxx), but only when own
processor is present, therefore not for SK TU3-CTR.
Have this data ready if you have a technical query.
P746 Module status
S
0000 ... FFFF (hex) Actual status (readiness, error, communication) of the technology unit (SK TU3-xxx), but only
when own processor is present, therefore not for SK TU3-CTR.
Code details can be found in the respective BUS module manual. Different contents are shown
depending on the modules.
P747 Inverter voltage range
Indicates the mains voltage range for which this device is specified. 0 ... 2
0 = 100..0.120V 1 = 200..0.240V 2 = 380...480V