NORDAC SK 5xxE Manual
126 Subject to technical alterations BU 0500 GB
Parameter
No.
Name Actual status and displayed values
INFORMATION (5.8), read only
P700 Current error
P701 Last error 1...5
P702 Freq. previous fault 1...5
P703 Current previous fault 1...5
P704 Voltage previous fault 1...5
P705 UZW previous fault 1...5
P706 P-set last error 1...5
P707 Software version (/-revision)
P708 Status digital input (bin/hex)
P709 Voltage analog input 1 [V]
P710 Voltage analog output [V]
P711 Output status [hex]
P712 Voltage analog input 2 [V]
P714 Operating period [h]
P715 Enable period [h]
P716 Actual frequency [Hz]
P717 Actual speed [rpm]
P718 Actual set frequency 1..3 [Hz]
P719 Actual current [A]
P720 Actual torque current [A]
P721 Actual field current [A]
P722 Actual voltage [V]
P723 Voltage-d [V]
P724 Voltage-q [V]
P725 Actual cos phi
P726 Apparent power [kVA]
P727 Mechanical power [kW]
P728 Input voltage [V]
P729 Torque [%]
P730 Field [%]
P731 Parameter set
P732 U phase current [A]
P733 V phase current [A]
P734 W phase current [A]
P735 Speed encoder [rpm]
P736 Link voltage [V]
P737
Current utilisation of brake resistor
[%]
P738 Actual utilisation of motor [%]
P739 Heat sink temperature [°C]
P740 Process data Bus In [hex]
P741 Process data Bus Out [hex]
To Next Page
Loading...
