3.2 Technology unit overview
BU 0500 GB Subject to technical alterations 49
Menu structure with the SimpleBox
P0--
_ _ _ _
P1--
P2--
P4--
P5--
P6--
P7--
P001
P002
P100
P101
P114
P200
P201
P220
P400
P401
P483
Opera tin g values
display (or operational)
fo ll o wi ng m a in s ON
P3--
P300
P301
P327
P003
To change a parameter value, the ENTER key
must be pressed when the applicable parameter number
is displayed.
Changes can then be made using the VALUE keys or and must be confirmed with to save them
and leave the parameter.
As long as a changed value has not been confirmed by pressing ENTER, the value display will flash; this value
has not yet been stored in the frequency inverter.
During parameter changes, the display does not blink so that the display is more legible.
If a change is not
to be saved, the "DIRECTION" key can be pressed to leave the parameter.
Accept changed values
Value to factory setting
Increase value
Reduce the value
Do not save
changed value
Parameter set display
To Next Page
Loading...
