10
E A S Y R E M O T E N O R D G A S
INSTALLER
This operation must be done by
technical service personnel only.
Errors in the configuation of your
EASYREMOTE remote control device
may lead to malfunctioning.
This operation configures the remote
control device to be compatible with the
boiler and the system to which it is con-
nected.
1. Move the remote control device to
OFF position.
2. Press the keys and and
keep them pressed until the display
will show PAr.
3. To confirm the function press button
.
Instead of the time the display will
show the parameter number, and
instead of the temperature the param-
eter value. The parameter number will
be blinking.
5 - Configurating operating parameters
To Next Page