35
E A S Y R E M O T E N O R D G A S
USER
The remote control device will display any
faults with code Exx blinking in place of
the temperature display.
To learn about the type of fault refer to the
boiler instruction booklet.
There can be two kinds of faults: those
which can be restored by the user and
those which cannot be restored.
13.1 - Restorable faults
You recognize these faults because icon
will light up and blink; they can be
reset by pressing key .
If there are no more restoring attempts
available icon will stay on. In such a
case, follow the steps of the boiler instruc-
tion and maintenance booklet. In case
the fault remains on, contact the techni-
cal service center.
13 - Fault signalling
To Next Page
Loading...