28
E A S Y R E M O T E N O R D G A S
USER
When operation mode WINTER or HEAT-
ING ONLY is selected, the remote control
device allows operation in AUTOMATIC
mode in which a priorly set program man-
ages the room temperature during the
various times of the day.
The room temperature can be set to two
independent levels: DAY ( ) and NIGHT
( ); the weekly heating program distrib-
utes these levels over the day.
Inside the remote control device there is
a standard program to control the room
temperature; the user can display and
change it as he likes
10 - Weekly heating program
FUNCTION ID ICON
DISPLAY HEATING
PROGRAM
steady
CHANGE HEATING
PROGRAM
blinking
After making the changes press key
again to exit the programming area.
The display / change mode of the heat-
ing program will be actuated by pressing
key ; the lighting of icon shows
that it is on.
To Next Page