PART iDENTiFiCATiON CHART
Refer to the drawings beUowto identify small parts used in assemMy, The number in parentheses by each draw-
ing is the key number of the part, from the PART LUSTin the center of this manual Note: Some small parts
may have been pre-attached, if a part is not in the parts bag, check to see if it has been pre-attached.
M10 x 40mm Screw (97)
M3 x 32mm Screw (102)
M8 x 20mm Button BoUt(92)
M4x 19mm SeUf-tappingScrew (100)
M6 x 16mm Screw (87)
M4 x 16mm Serf-tapping Screw (99)
M4 x 13mm Serf-tapping Screw (112)
M6 x lOmm Set Screw (114)
B
M6 Washer (107)
MIO NyUonLocknut (108)
MIO x 50mm BoUt(96)
M8 NyUonLocknut (110)
MIO x 50mm Button BoUt(88)
MIO x 55ram Carriage Bolt (83
M6 x lOOmm Screw (113)
MIO x lOOmm Button Bolt (91)
M8 x 65mm Button Bolt (94)
MIO x 65mm Bolt (95)
q
M6 x 70mm Screw (93)
MIO x 75mm Bolt (8g)
M6 x 85ram Screw (85)
MIO Washer (105) MIO x 115mm Bolt (84)
To Next Page
Loading...
