8
5. Tip: Avoid pinching the wires. Attach each
Handlebar (35, 36) to a Handlebar Post (7) with
two M8 x 35mm Button Bolts (64) and two M8
Locknuts (57). Make sure that the Locknuts
are in the hexagonal holes.
5
36
7
7
35
57
57
64
64
64
Hexagonal
Holes
Hexagonal
Holes
Avoid pinching
the wires
6
6. Have another person hold the Right and Left
Handlebars (35, 36) near the Upright (6).
Insert the Right and Left Pulse Wires (54, 67)
into the holes in the Upright (6) and pull them
upward out of the top of the Upright.
Tip: Avoid pinching the wires. Attach the
Handlebar Posts (7) to the Upright (6) with two
M8 x 56mm Button Screws (61) and two M8
Locknuts (57).
36
35
67
57
54
6
61
61
7
7
Avoid pinching
the wires
To Next Page
Loading...
