7
96
95
99
17
16
27
94
STEP 2
I. Carefully lift the Handlebar Post (99) until it is vertical. Put the front plastic cover (95) into the Handlebar post
(99). Connect the Upper Computer Cable (96) and the Lower Computer Cable (94).
II. Remove the loosely fitted Allen bolts (16),spring washers (17) and washers ( 27) from the Main Frame and
lower the Handlebar Post (99) into position. Loosely re-fit the Allen Bolt (16), Spring washer (17) and washers (
27) and align the Handlebar Post so it is straigh. Then tighten the Allen bolts fully
To Next Page
Loading...
