Nordson 3000V Series - Records of System Settings; Record of Setpoint (Operating) Temperature Settings

Installation
A1-72
E 2000 Nordson Corporation
All rights reserved
41-3000V
Issued 5/00
A3EN-04-[3V-A-AAXP]-12
Use these forms to record your system settings. This record will be
useful if you ever need to reprogram the system. Store the forms in a
convenient place. You may want to give a copy to others in your
workplace who need the information.
Table A 1-21 Record of SETPOINT (Operating) Temperature Settings
Zone
Type
Zone
Number
(See
Note A)
Zone
Name
Default Setpoint
(See Note B)
Range of Setpoints
(See Note C)
Revised Setpoint
Internal 1 Tank ---- 38--232 C
(100--450 F)
2 Grid ---- 38--232 C
(100--450 F)
Hose 1 Hose 1 ---- 38--232 C
(100--450 F)
2 Hose 2 ---- 38--232 C
(100--450 F)
3 Hose 3 ---- 38--232 C
(100--450 F)
4 Hose 4 ---- 38--232 C
(100--450 F)
5 Hose 5 ---- 38--232 C
(100--450 F)
6 Hose 6 ---- 38--232 C
(100--450 F)
Gun 1 Gun 1 ---- 38--232 C
(100--450 F)
2 Gun 2 ---- 38--232 C
(100--450 F)
3 Gun 3 ---- 38--232 C
(100--450 F)
4 Gun 4 ---- 38--232 C
(100--450 F)
5 Gun 5 ---- 38--232 C
(100--450 F)
6 Gun 6 ---- 38--232 C
(100--450 F)
NOTE A: Only Series 3900V units have a grid zone (internal zone number 2). Your unit may be able to control
the temperature of two, four, or six hoses and guns, depending upon your unit’s features.
B: Four dashes (- - - -) show that the heaters for this zone have not been programmed.
C: For a zone to be on, the operating temperature must be set at or above 38 C (100 F).
10. Records of System
Settings
R
eco
r
d
o
f
S
E
T
P
O
I
N
T
(Operating) Temperature
S
e
t
t
i
n
g
s