Safety
1-2
Part 1105120-03
E 2015 Nordson Corporation
Intended Use
Nordson ultraviolet (UV) equipment is intended specifically for integration
into other machines and should NOT be operated as a standalone system
or without appropriate safety guarding, shielding, and interlocks. It is the
responsibility of the integrator and end user to ensure that the final
assembly fulfills all necessary legislation and is completely safe before
operation.
This equipment is designed for the accelerated curing of UV inks,
adhesives, and coatings. Do not use this equipment to cure alternative
materials unless approved by the material supplier.
The equipment is not flame or explosion proof and is not designed for use in
hazardous areas.
Use of Nordson equipment in ways other than those described in the
documentation supplied with the equipment may result in injury to persons
or damage to property.
Some examples of unintended use of equipment include
S using incompatible materials
S making unauthorized modifications
S removing or bypassing safety guards, shielding or interlocks
S using incompatible or damaged parts
S using unapproved auxiliary equipment
S operating equipment in excess of maximum ratings
S using equipment in hazardous areas
Regulations and Approvals
Make sure all equipment is rated and approved for the environment in which
it is used. Any approvals obtained for Nordson equipment will be voided if
instructions for installation, operation, and service are not followed.
To Next Page
Loading...
Need help?
General