Parts
7-8
Part 1105120-03
E 2015 Nordson Corporation
NoteQuantityDescriptionPartItem
31 −−−−−−
S SCREW, flat head, phillips, M3 x 10, steel, zinc
AR
32 760529
S HANDLE, lamphead
2
33 982178
S SCREW, socket, M5 x 50, black
4
34 983401
S WASHER, lock, split, M5, steel, zinc
4
NOTE A: Order the correct bulb for your application. Bulbs are listed on page 7-10. Bulbs are recommended spare
parts.
B: Recommended spare part. Keep this part in inventory to avoid unplanned downtime.
C: Order the correct reflector and bulb mounting kit for your reflectors. Kit includes 2 TPFE reflector
supports, 2 bulb spring retainers, 4 M3 x 10 screws, and 4 M3 lock nuts.
D: Optional equipment.
E: Retainer kit includes 2 reflector retaining brackets. If you are not sure what type of reflectors, supports,
and retaining brackets you have, refer to page 6-7.
NS: Not Shown
Torque Specifications for Lamphead Fasteners
Item Description Torque
11 SCREW, truss, M4 x 10, Phillips, steel, zinc
1.18−1.57 NSm (0.87−1.16 lb-ft)
12 SCREW, button head, socket, M3 x 4, zinc
0.50−0.65 NSm (4.5−6.0 lb-in)
13 SCREW, button head, socket, M3 x 10, zinc
0.34−0.57 NSm (0.25−0.42 lb-ft)
15 SCREW, pan head, recessed, M4 x 6, zinc
1.18−1.57 NSm (0.87−1.16 lb-ft)
17 SCREW, slotted pan head, 6−32 x .250 in.
0.51−0.68 NSm (0.37−0.49 lb-ft)
20 NUT, lock, nylon, M3, steel, zinc
0.51−0.68 NSm (0.37−0.49 lb-ft)
27 SCREW, pan head, phillips, M4 x 40, steel
1.18−1.57 NSm (0.87−1.16 lb-ft)
28 NUT, hex, w/external toothed washer, M4
1.18−1.57 NSm (0.87−1.16 lb-ft)
29 SCREW, truss, M4 x 10, Phillips, steel, zinc
1.6−1.8 NSm (14−16 lb-in)
33 SCREW, socket, M5 x 50, black
4.6−5.1 NSm (40−45 lb-in)
To Next Page
Loading...